After I boot-up, the following appears:
Auto-detecting Pri Master ... Not Detected
Auto-detecting Pri Slave ... Not Detected
Auto-detecting Sec Master ... [press ESC to abort] Not Detected
Auto-detecting Sec Slave ... [press ESC to abort] Not Detected
Afterwards, it proceeds to trying to boot from floppy but it cannot.
Help?
Copyright © 2024 Q2A.MX - All rights reserved.
Answers & Comments
Verified answer
Check all your cables and make sure they are in the right place on your motherboard, then check and make sure they are all getting power from the power supply, if you are still getting that message you have some kinda hardware issue
you will could systematically track down why the bios is putting. Disconnect all problematical drives (HD) yet universal. examine bios settings. examine HD pin connections (grasp/Slave and so on.). examine to make sure IDE/SATA cables are related wisely to HD and motherboard. in accordance with HD, some HD producer desktops have issues working with different HD manufactures. Is the situation solved if the HD's are switched? examine length of recent HD to work out if it interior specifications of older motherboard, bios, and OS HD? Does thechronic happen decrease than DOS command instant? you are going to be able to could partition thechronic for it to be seen.
Check that the cables are connected properly.
The drive(s)may have failed.