I am recording cds on my cassette recorder via my stereo system. while I can moniter the cassettes while I am recording I am unable to listen to them afterwards with the current connection set up without changing all the wiring set up. The stereo has a tape out, tape, aux, phono,tape out, tape moniter. I have the cassette-play to the stereo tape-monitor. The cd player has a play-out which I have to the cassette deck Record-In. There are no more line connections available on the cd player or the cassette deck. Is there a way I can listen to the cassettes I have recorded without changing all the wiring back?
Copyright © 2024 Q2A.MX - All rights reserved.
Answers & Comments
Verified answer
Connect the CD player to the Aux input jacks,
and set the receiver's selector to that input.
Connect the cassette deck's Record (Input) jacks
to the receiver's Tape Out (Record) jacks.
Connect the cassette deck's Play (Output) jacks
to the receiver's Tape Monitor (Play) jacks.
Set the receiver's Tape Monitor switch to ON.
To listen to other sources, set the Tape Monitor switch to OFF.
Cassette And Cd Player Stereo
Attach the cassette deck to the stereo by going from cassette-play to the aux in on the stereo, and be sure to switch the source button to aux. On many old stereos there is also a tape monitor button, you may want to check this function before you change any wiring.
you'll need: a million tape deck with RCA outputs a million RCA to a million/8" stereo audio plug a million pc finished with a valid card and a CD-R a million audio recording application like adobe audition or soundforge connect your tape deck on your pc by the audio cable and plug it in. ensure that the enter on your soundcard controls isn't muted. open the application and press the record button. press play on the tape deck. you could want to change the quantity to get the right consider your recording. once you're performed, it would want to ward off the audio in wav of mp3. and also you're performed!